Industrial Transformers

Product Details:

We are offering 100 KVA Ultra Isolation Transformer to our clients.

Features:

• Isolation Transformer: Any double wound transformer is internally an isolation transformer as the primary and secondary are isolated from one another through insulation. However, modern machines and systems need a truly isolated, clean and stable power requirement. This is ensured by an ultra isolation transformer (UIT), it provides for total electrical and electrostatic isolation with most effective screening of spikes, surges and transients, further it gives a true isolated local neutral and dedicated earth which is very essential for modern machines. Ultra isolation transformer attenuates common mode noise and transverse mode noise and provides for noise or interference free power. In principle, UIT only transfers 50 Hz. Power by transformers action through mutual inductance. It prevents transfer of RF and HF disturbances with extensive insulation between primary and secondary. The insulation levels withstands HV breakdown strength of 2.5 KV and gives a DC Galvanic isolation of above 1000 megohms.
• Ingress Protection for enclosure for isolation Transformer: Isolation transformer conform to IP-20 protection as per IS / IEC : 60529 : 2001 Requirements for other degree of protection can be offered on request.
• Details of Earthling for Isolation Transformers: It is recommended that every isolation transformer should have its own grounded earth, complete in itself.
• Constructional Features of Isolation Transformers: Isolation transformer shall invariably be in one air cooled section. The enclosures are constructed from M.S. angles and CRCA M.S. sheets of best quality The professional painting process comprises of
• 7-tank pre-treatment
• Primer Coating
• Two coats of final finish paint or powder coating of specified shade.

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

We offer Three Phase Isolation Transformer with dry type, natural air cooled isolation transformers where the primary and secondary side windings are electrically and galvanically separated from each other, thus, there is a functional insulation by design. Also removes EMI/RFI sound, power switching transients and background spikes . Our quality assurance teams completely examine our products before hand over to the customers. This will assist to succeed the trust of the client as well as really helps to make the good customer relationship.

Features:

• Highly Reliable
• Efficient
• Safe to use
• Cost Effective
• Long service life
• Excellent designing

Product Details:

Features:

• Very high efficiency
• Good voltage regulation
• No wave from distortion
• Rugged and compact construction
• Continuous, stepless and smooth control of the output
• High short time surge capacity
• Auto tuning
• Number of output types
• Selection of the type of inputs
• Relay outputs for alarms
• Microprocessor-based circuitry
• Dual display
• Alarm outputs
• Thyristorised heater controller
• Keyboard programmability
• Universal inputs
• No wave from distortion

Standard and Non-Standard Voltage Range:

• Single Phase: Input 240 V, Output 0 to 270 V
• Two-Phase: Input 415 V, Output 0 to 470 V

Standard Current Ratings:

• Air cooled types from 2Amps to 60Amps {However we recommend oil cooled types above 30Amps}
• Oil cooled type from 2Amps to 600Amps.

Double Layer Dimmers:

• For Servo Controlled Voltage Stabilizers double layer dimmers can be used without separate Buck-Boost Transformers so as to achieve cost efficiency and compactness. These are standardized viz. 1kVA, 2kVA, 3kVA & 5kVA suitable for input range: 170 to 270 V and output: 230 V

Product Details:

Product Details:

Product Details:

Product Details:

Product Details: